How Presaturated Wiping Systems Help Control Static Electricity
Surface preparation can have a significant effect on manufacturing safety, product quality and production time. The choice of wipe—and how the cleaning liquid is applied—deserves as much attention as the chemistry itself.
Two customer applications demonstrate how replacing conventional wiping methods with a carefully specified presaturated system can address static problems while improving the production process.
Why dry wiping can create a problem
Contact and separation between a cloth and a surface can generate an electrostatic charge. On insulating materials such as glass reinforced plastic (GRP) and ABS, that charge can accumulate.
Where flammable vapours are present, an electrostatic discharge can become an ignition source. Whether ignition occurs depends on several factors, including the atmosphere and the energy of the discharge.
This makes the wiping stage particularly important when preparing plastic or composite components for bonding or painting.
GRP caravan panels: changing the surface preparation process
One of our customers manufactures caravans and motorhomes using GRP panels. Their existing preparation method involved wiping the GRP skin with dry cloths before applying a cleaner/activator.
The customer had experienced four shop-floor fires, which they attributed to electrostatic discharge associated with this process.
Our approach was to combine their cleaner/activator with a split fibre nonwoven, creating a presaturated wiping system. Instead of dry wiping followed by a separate liquid application, operators could prepare the surface using a wipe already loaded with the required chemistry.
This change addressed the dry-wiping stage associated with charge generation. It also improved the way the cleaner/activator was laid down across the GRP surface.
In this application, the combination of liquid and nonwoven delivered more even coverage and improved bond strength. The wipe became a controlled application tool, with the fabric and chemistry working together to improve surface preparation.
The safety objective was to control the static hazard within that process. Any claim of complete elimination would require supporting assessment and measurements under actual production conditions.
Automotive ABS parts: removing a separate production stage
A second customer manufactures ABS components for the automotive industry.
Before spraying, their process involved using a tack cloth to remove surface contamination, followed by a deionisation stage to neutralise electrostatic charge.
We replaced the tack cloth with a presaturated wipe containing isopropyl alcohol (IPA) and deionised water.
In this customer’s application, the revised wiping process provided the cleaning and static-control performance needed to remove the separate deionisation stage. This simplified preparation and saved the customer time and money.
The benefit extended beyond changing a consumable: a revised wiping method allowed an entire process step to be removed.
Why the complete system matters
Presaturation brings the liquid, wipe material and application method together. A suitable wet wiping system can change charge generation and dissipation compared with dry wiping, but being wet does not automatically make every wipe antistatic.
The result depends on the formulation, wipe material, surface, evaporation rate and operating conditions. An IPA/deionised water wipe should therefore be assessed for its intended application, rather than assumed to provide universal static protection.
Where flammable liquids are involved, wiping must also form part of the wider approach to ignition control, ventilation, handling and disposal described in HSE guidance on the safe use of flammable liquids.
Before removing an existing static-control stage, the revised process should be checked under representative production conditions, including after the liquid has evaporated.
A better wiping process can deliver wider benefits
These two applications show the value of reviewing surface preparation as a complete process.
For the caravan and motorhome manufacturer, combining the cleaner/activator with a split fibre nonwoven addressed a hazardous dry-wiping stage while improving liquid coverage and bond strength.
For the automotive component manufacturer, an IPA/deionised-water presaturated wipe replaced the tack cloth and enabled the removal of a separate ionisation stage.
The right wiping system can do more than clean a surface. Properly selected and verified, it can help control static, improve preparation quality and reduce production time.
If dry wiping or a separate static-removal stage forms part of your production process, speak to us about assessing a presaturated wiping system for your application.